Protective Coating & Technical Paints

Protective coating materials organized by coating role: primers, base and intermediate coats, and finish coats. Josoor helps buyers select suitable products for steel, concrete, outdoor, and industrial exposure requirements, with exact seawater and chemical suitability confirmed for the selected grade.

Browse Material Groups

Primers

Foundation layers for prepared steel, concrete, and rusty metal. The correct primer depends on the substrate condition, preparation method, and planned coating system.

Epoxy Zinc-Rich Primer

Starting a steel coating system with a zinc-rich primer layer Josoor sources epoxy zinc-rich primer families listed for protective coating systems on steel and prepared metal surfaces. Exact zinc content, substrate preparation, compatible layers, and system performance belong to the selected grade and current technical documentation.

View Group

Industrial Primer

Preparing metal, machinery, or steel construction for a finish coat Josoor sources one-component industrial primer families, including catalog-described alkyd-resin-based primers for metal surfaces, machinery, and steel construction. The selected primer must be matched to the substrate, preparation, exposure, and planned topcoat.

View Group

Rust-Surface Primer

Priming a rusty metal surface when full surface renewal is not practical Josoor sources Ferroust and other surface-tolerant primer families listed for rusty surfaces. The catalog describes direct application and anticorrosive protection for the exact family, but preparation, remaining rust, and overcoat requirements still require confirmation.

View Group

Concrete Impregnation Primer

Preparing concrete before a selected coating, repair, or floor-protection system Josoor sources EP 12 and related concrete-impregnation primer families listed for prepared concrete before quartz and a coating, repair mortar, or mortar. The primer, substrate moisture, follow-on material, and system build-up must be confirmed together.

View Group

Base & Intermediate Coats

Protective layers that build the coating system on steel and concrete before the final finish. Confirm the complete system, compatibility, film thickness, and recoat requirements for the selected products.

Epoxy Intermediate Coat

Building the middle layer of a protective coating system Josoor sources epoxy mix primer-mid coat, epoxy high-build mid coat, and surface-tolerant mid-coat families listed for protective systems. The intermediate layer must be selected with the primer, topcoat, substrate preparation, exposure, and recoat requirements in view.

View Group

Epoxy Coal Tar

Protecting tanks, pipelines, or underground structures with a coal-tar epoxy layer Josoor sources epoxy coal-tar and solvent-free epoxy coal-tar coating families listed for selected tank, pipeline, underground, and protective-coating contexts. The catalog does not by itself establish potable-water, immersion, marine, or regulatory suitability.

View Group

Epoxy Self-Leveling Floor Coating

Building a seamless floor surface on a prepared dry substrate Josoor sources two-component, solvent-free epoxy self-leveling floor systems, including catalog-described systems with a penetrating primer, self-smoothing body coat, and protective topcoat. Moisture condition, layer build-up, and system performance must be confirmed for the selected grade.

View Group

Protective Finish Coats

Finish coats for selected outdoor, industrial, UV, weather, and chemical exposure conditions. Exact seawater, immersion, and chemical resistance must be confirmed for the required grade and current technical documentation.

Epoxy Topcoat

Finishing metal or concrete where industrial exposure matters Josoor sources epoxy topcoat families listed for metal or concrete surfaces exposed to acids, bases, oil, petroleum, and industrial conditions. Gloss and semi-gloss options are catalog-described for selected grades; the complete coating system and exposure must be confirmed.

View Group

Polyurethane Topcoat

Finishing exposed steel, tanks, or machinery with a polyurethane topcoat Josoor sources two-component aliphatic polyurethane topcoat families listed with gloss or semi-gloss finishes and catalog-described sunlight, UV, mechanical, and chemical resistance for selected grades. Weather, marine, immersion, and overcoating requirements must be confirmed before specification.

View Group

Industrial Topcoat

Finishing steel construction and metal equipment with a coordinated topcoat Josoor sources one-component industrial topcoat families, including catalog-described alkyd-resin-based gloss and semi-gloss options for truck-mounted equipment, steel construction, and related metal surfaces. The selected finish must be matched to the substrate, preparation, exposure, and primer system.

View Group

Heat-Resistant Paint

Coating equipment that operates under elevated temperatures Josoor sources heat-resistant paint families listed for radiators, manifolds, transformers, chimneys, and other heat-exposed equipment. Selection depends on the operating temperature, substrate, preparation, exposure, and the exact catalog grade.

View Group

For protective coatings and technical paints, Josoor supports sourcing, application-focused material guidance, project fit assessment, and export logistics. Trading & Market Access, Technical Solutions, Feasibility Studies, and Logistics & Supply Chain.